Detrum GAVIN -8C Transmitter with Istone SR86A receiver

Detrum GAVIN-8C Transmitter with Istone SR86A receiver
Made By: Dynam
Item No.: DTM-T010

GAVIN-8C Radio Control Sysytem
Package Content:
1x GAVIN-8C Transmitter
1x SR86A Receiver


GAVIN-8C Transmitter
01. Wireless IC
Adopting powerful wireless chips, extended with power amplifier (PA) and low noise amplifier (LNA), can maximize the system output power while reducing the system noise factor, thereby improving the signal coverage.
02. All-angle antenna
The transmitter uses excellent linear all-band gain antenna, can greatly improve the transmitting efficiency, thereby enhancing the stability of the R/C system. The receiver adopts diversity antenna, combined with the signal detection and switching algorithm, the receiving signal is stable and reliable.
03. Suitable for various aircrafts
It is suitable for airplanes, helicopters, multi-rotors and other aircrafts.
04. Fast response
The response time is only 2.6ms, even 8 channels it acts synchronously.
05. Long distance remote control
The R/C system adopts 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping spread spectrum (FHSS) technologies, has high receiving sensitivity and strong anti-interference capability, can support a stable remote control for more than 1,000 meters on the ground and more than 1,600 meters in the air.
06. LCD
192*96 high-resolution dot-matrix LCD screen, providing with easy to understand menu, it is very simple to use.
07. Unique ID code
Each transmitter has an individually assigned, unique ID code. Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver. When the receiver is working, it will verify whether the ID code of the transmitter is being paired, to enhance the stability of the R/C system.
08. Fail safe function
If the aircraft flies out of the remote control range and cannot receive a valid RF signal from the transmitter, the receiver’s outputs can be driven to their preset failsafe positions.
09. High section precision
By using the 4096 section precision sticks, you can experience a smooth and exquisite flight operation.
10. Low voltage alarm
Detecting the input voltage of the transmitter in real time, it will alarm in advance when it is low battery voltage. This will bring greater security for flight operation.
11. USB Upgrade
Upgrade by a USB cable helps GAVIN-8C always keeps the latest program.
12. Setting the programmable items of flight controller for airplane
When working with SR86A sport receiver which is integrated with 6-axis gyro, GAVIN-8C can be used to set its programmable items in real time. For example, roll/pitch/yaw gain, flight mode, wing type, etc. Then you can set the programmable items for SR86A conveniently.


SR86A Sport Receiver:
Output Signals: 8-channel PWM
Channels: 8-channel
Sensor: 6-axis gyro
Sensitivity: -97dBm
Output: PWM (71Hz)
Transmission Range: More than 1,000 meters on the ground /more than 1,600 meters in the air
Input Voltage: 3.6V-16V
Size: 51mm*28.4mm*14.5mm
Weight: 15g

FEATURES:
Main Control IC
32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset
Control Algorithm
Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes.
Flight Mode
Four flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance). You can switch between different modes by the toggle switch.
Adjusting the Gain
Set the gain and other programmable items with matched transmitter.
High Sensitivity
SR86A adopts 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping (FHSS) technologies, having high receiving sensitivity and strong anti-interference capability.
Diversity Antenna
By using diversity antenna, combined with the signal detection and switching algorithm, the receiving signal is stable and reliable.
Unique ID Code
Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver.
Fail Safe
If the aircraft flies out of the remote control range and cannot receive a valid RF signal from the transmitter, SR86A’s outputs can be driven to their preset failsafe positions.